Create a gate for a trailor entrance or a wide entry by combining two Gates to create a double gate.
To create a DOUBLE GATE system you will require 2 x SF2-GK100.
The maximum width in a two gate build would be 10ft. Take a measurement between the 2 gate posts (maximum width is 120in. / 10ft.). From that measurement, subtract 2.25 inches and divide by 2.
For eaxmple a 120in. gap minus 2.25 and then divided by 2 would be 58.875in. This is the width of each gate that you need to build.
Each top and bottom wood rail (2in. x 4in.) needs to be cut 58.875in. for each gate frame you are building. This will allow .75 inches for each hinge and .75 inches between the 2 gates.
Add your fence pickets. deck boards to line up with your fence sections. Add a gate wheel and gate pin (sold separately) to the gates to make them easier to operate.
