Are you in Canada?
Please Note: Home deliveries will need to be off loaded by customer by hand.
Vertical Stringer Kit
Stringers, (often called "Rails"), are the upper and lower rails for the Slipfence vertical fencing system. Included are; 2- stringers, (upper and lower), 4 brackets, 4 nuts and bolts, 10 self drilling screws and 100 wood screws. Just fasten these rails with brackets and stainless hardware included to Slipfence posts and slip in regular fence boards.
Cap Rail for top of Vertical Slipfence panel
This is the nice top black cap rail that sits snug on top of the wood pickets in a vertical Slipfence panel. This is not structural, it is only to finish off the top of the fence panel to match the upper and lower stringers. Also protects tops of wood pickets from rotting. This cap rail can also be used atop a traditional shadowbox style wood fence provided that the boards are 5/8" width and 2 x 4's are used as rails.
This kit is not a gate. It includes the following items to construct either a vertical or horizontal gate on site: 6 - L brackets to construct a gate frame our of 2 x 4 wood. 1 - Thumb Latch that can be locked from the inside and accessed from both sides. 1 - Pair of adjustable self-closing gate hinges, ideal for pool gates. 1 - Roll of 1.5" black rubber strapping to emulate the stringers in a vertical system or the channels in a horizontal system. 1 - pack of 100 wood screws to attach rubber strapping to wood as seen in video.
VERTICAL HORIZONTAL TRADITIONAL
Aluminum Traditional Bracket to fasten 2 in. x 4 in. wood rail to aluminum Fence Posts
These brackets are packed 2 per kit with screws and are to be fastened to the Slipfence aluminum post with the stainless self drilling screws included. The brackets provide a cradle for a 2 x 4 or 2 x 6 to be used as top, bottom , and middle rails for a traditional vertical board wood fence. For a horizontal traditional fence you can bend the bottom flange on these brackets down and slip in a 2 x 4 vertically against the post, then clad the front side with boards horizontally using deck screws.
6 ft. Post with base plate
This post is 3" x 3" x 76" Long, (includes cap), to accommodate a 6' high fence built on top of concrete. There is a 6" x 6" x 1/4" thick aluminum plate with 4 anchor holes welded to the bottom of this post. Anchors are not included in this kit and must be purchased separately in accordance with regional code regulations and substrate that the post will be mounted to.
HORIZONTAL VERTICAL TRADITIONAL