Slipfence Store

These posts are used for all Slipfence residential systems. 3" x 3" x 8' 4" powder coated black for outdoor use in all climates.

These posts are used for all Slipfence residential systems. 3" x 3" x 9' 4" powder coated black for outdoor use in all climates.

These posts are used for all Slipfence residential systems. 3" x 3" x 10' 4" powder coated black for outdoor use in all climates.

These posts are used for all Slipfence residential systems. 3" x 3" x 12' 4" powder coated black for outdoor use in all climates.

Stringers, (often called "Rails"), are the upper and lower rails for the Slipfence vertical fencing system. Included are; 2- stringers, (upper and lower), 4 brackets, 4 nuts and bolts, 10 self drilling screws and 100 wood screws. Just fasten these rails with brackets and stainless hardware included to Slipfence posts and slip in regular fence boards.

This is the nice top black cap rail that sits snug on top of the wood pickets in a vertical Slipfence panel. This is not structural, it is only to finish off the top of the fence panel to match the upper and lower stringers. Also protects tops of wood pickets from rotting. This cap rail can also be used atop a traditional shadowbox style wood fence provided that the boards are 5/8" width and 2 x 4's are used as rails.

These are the channels that get attached to the Slipfence Aluminum posts to slide boards down into creating a nice horizontal fence system. 2 channels per kit and includes self drilling screws and wood screws. Powder coated for outdoor use in all climates. 70" Long for a 6' high fence

These are the channels that get attached to the Slipfence Aluminum posts to slide boards down into creating a nice horizontal fence system. 2 channels per kit and includes self drilling screws and wood screws. Powder coated for outdoor use in all climates. 91" Long for an 8' high fence

This kit is not a gate, it is not compatible with our composite fence. It includes the following items to construct either a vertical or horizontal gate on site: 6 - L brackets to construct a gate frame our of 2 x 4 wood. 1 - Thumb Latch that can be locked from the inside and accessed from both sides. 1 - Pair of adjustable self-closing gate hinges, ideal for pool gates. 1 - Roll of 1.5" black rubber strapping to emulate the stringers in a vertical system or the channels in a horizontal system. 1 - pack of 100 wood screws to attach rubber strapping to wood as seen in video.

This is the nice top black cap rail that fits snug on top of the top board in a Horizontal Slipfence panel. This is not structural, it is to finish off the top of the fence panel to match side channels. 84" Long so can be cut to exact width of each fence panel and fits snuggly inside the side channels.

4 Extra Vertical Brackets with screws, nuts and bolts to fasten stringers to posts.

This is the same cap that gets packed inside of each post prior to shipping. 3" x 3" Aluminum post cap coated for outdoor use in all climates. Simply tap onto top of post with rubber mallet as they self tighten onto post.